Continuous Automatic Disposal Plant Solution to Oily Sludge

Basic Info

Model NO.	BJYN-50
Usage	Oil Recycling&Drying Sludge
Fuel Advantage	Use Recycling Fuel to Heat
Air Puritication System	Installed
End Discharge	Oil Content Under 0.3%
Electricity	380V
Labors	3-4
Land	200-1500m²
Reduction	to 10-15%
Emission	CO2, H2O
Environmental Advantages	Green and Saving Energy
End Discharge Usage	Construction Bricks
Transport Package	Full Container
Specification	2.3x2.5
Trademark	Benji
Origin	China
HS Code	8477800000
Production Capacity	200sets/Year

Product Description

Continuous Automatic Disposal Plant Solution to Oily Sludge1,Process Line
A:Hierarchical dehydrate with 50% moisture content
B: remove oil by pyrolysis
C:cooling and recycling
D:deslag burn again till oil content within 0.3%.
2,Technology Advanced
No loose agent,no need fuel,no moisture in slag,no organic,no smell,no interruption in production.Harmless,stable,reduction,recycling and benefit.

Pyrolysis Process Introduction

(1)Conditioned Process.The water content of 80-95% oily sludge dehydrated by centrifuge was added into the conditioner, and the coating water in the oily sludge was broken to facilitate the precipitation of water.
(2)Concentration Process.Let oil sludge concentration separation.Waters go out from up and drier oil sludge goes into flocculation.
(3)Flocculation. Pre-sperate oily sludge from water.
(4)Muti-prefiltration.To obtain drier sludge after prefiltration.
(5)Multi-level transform ultrafiltration. Deeply dehydration to standard discharge.
(6)Convey.40-60% oil content here.
If you want lower oil content rate,please continue below:
Second,Drying incineration system
(7)Drying
(8)incineration
The pyrolysis of organic matter in oily sludge burned by adding catalytic accelerant. In the preheating and drying materials, the injector is used to mix the catalytic accelerant with the oily sludge. Under the action of high temperature and catalytic accelerant, the oily sludge pyrolyzes and self-ablates, and finally the oily sludge becomes red brick color, completely devoid of water and organic matter, leaving only dry inorganic matter.

Third,Smog and dust purification system

1,Second burning of smog and dust.Burned in high temperature within 850-1000ºC,promise Carbon monoxide in standard after second burning and also decompose dioxin

2,Heat Exchange.
3,Denitration.
4,Desulfurization.
5,Ionize "Purification"

Slag Passivation and Recycling System

1,Passivation. To make harmful heavy metal passivating in case of releasing hazard.

2,Brick Production.Inorganic residue material can recycled to produce into bricks

Products

Continuous Automatic Disposal Plant Solution to Oily Sludge

Basic Info

Product Description